| •
|
Put on gloves to protect your
hands. |
| •
|
When prying with a flat-tip screwdriver,
wrap it with protective tape to prevent
damage. |
| •
|
Take care not bend or scratch the cover
and other
parts. | |
| 1. |
Loosen the radiator upper cover mounting bolts
and clips.
|
| 2. |
Remove the mounting clips.
|
| 3. |
After loosening the front bumper side’s
mounting screw and clip, then disconnect the side’s.
|
| 4. |
Push the lock pin, disconnect the fog lamp
connector (A). |
| 5. |
Remove the front bumper.
|
| 6. |
Installation is the reverse of
removal.
| •
|
Make sure the connector is plugged
in properly. |
| •
|
Replace any damage
clips. | | | |
